Heavy Duty Drawer Slides Cabinet Side Hidden Slide Rail Wardrobe Folding Telescopic Plug-in Storage Swing Door Furniture Hardware Set(450mm)

1.Soft-close push-open drawer slides are designed to push open quietly and smoothly and close automatically.2.The slides are smooth and durable, and easy to install.3.drawer slides feature a full-extension design that opens completely for easy access.Product Material: Cold Rolled SteelProduct Process: Surface SprayingScope of Application: All Kinds of Wooden CabinetsAccessories: a pair of 304 stainless steel medium bending hinge (hinge cup: 40mm)(Can be diverted, two -stage force damping buffer)Installation Precautions:Applicable to the door height 1m-2.5m, ( below 1.5m : install one pair slide rail, 1.5m -2.5m: install two pairs slide rail)Cabinet depth: 400mm-700mmThe width of the door panel: 300mm-650mmThe thickness of the door panel: 18-27mmThe weight of a single door: 10-18kgThe Door Panel Needs to Be Reserved for 5 ~ 10cm to Install the handle. Convenient door panel panel push-pull14 Inches (350mm)Recomged door width: 210+ (50 ~ 100)Recommended Cabinet depth: 350+ Door ThicknessFixed distance: 140mmHidden distance: 210mm16 Inches (400mm)Recomged door width: 260+ (50 ~ 100)Recommended Cabinet depth: 400+ Door ThicknessFixed distance: 140mmHidden distance: 260mm18 Inches (450mm)Recomged door width: 310+ (50 ~ 100)Recommended Cabinet depth: 450+ Door ThicknessFixed distance: 140mmHidden distance: 310mm20 Inches (500mm)Recomged door width: 360+ (50 ~ 100)Recomged Cabinet depth: 500+ door ThicknessFixed distance: 140mmHidden distance: 360mm22 Inches (550mm)Recomged door width: 410+ (50 ~ 100)Recommended Cabinet depth: 550+ door ThicknessFixed distance: 140mmHidden distance: 410mm24 Inches (600mm)Recomged door width: 460+ (50 ~ 100)Recomged Cabinet depth: 600+ door ThicknessFixed distance: 140mmHidden distance: 460mm26 Inches (650mm)Recomged door width: 510+ (50 ~ 100)Recomdynded cabinet depth: 650+ door ThicknessFixed distance: 140mmHidden distance: 510mmRequirements for doors and cabinets:1. The height of the door is 8mm shorter than the net inner height of the cabinet (Leave 3mm on the Top and Leave 5mm on the Bottom. Please Operate Strictly According to the Drawings During Installation)2. Drill hinge holes according to the requirements of the drawings3. The cabinet needs to make an embedded effect (need to make an Embedded door)If you want to install a clapboard in the middle, please pay attention to reserve enough space.Installation guide(1) Installation sliding rail1. When installing the sliding rail, the distance from the edge of the sliding rail to the edge of the cabinet is the thickness of the cabinet door panel. For example, the door panel is 25mm, and the distance is 25mm.2. Install the sliding rail on the upper part of the cabinet and the bottom, and the hole distance refers to the first page(2) Install steel rope1. Install the sliding rail according to()2. Pull the steel rope of the guide rail, then pull the steel rope to the roller at the diagonal, bypass the roller, and fix the steel rope under the screw.3. Adjust the tightness of the steel rope and tighten the screw.4. Repeat the above steps in the other slide rail.(3) Install hinge and door1. Use (m4*5mm) to fix the door panel and side panel during installation.2. Put the hinge in the holes and fix the screws.3. The hinge is fixed on the sliding rail board and the door panel.4. Close the door check gap. If you need to adjust, please refer to ().(4) Adjust the door panelIn the case of ensuring the weight of the door does not exceed 18kg, if the door will sag slightly, you can adjust the screw of the steel rope. The best state of the steel rope is to maintain a slight tension.(5) Adjust the hinge1. Adjust left and right : -0.5mm/5.5mm2. Adjust front and back : 2.8mm3. Adjust up and down: -1.5mm/ 1. 5mm(6) Install the positioning wheel1. As shown in the figure, fix the positioning wheel on the bottom plate and top plate of the cabinet

• 1.Drawer slides allow drawers to close quietly and smoothly, reducing noise.
• 2.Drawer slides feature dampers that allow the drawer to close slowly and automatically.
• 3.The built-in solid steel ball reduces friction and makes sliding smoother.